SCSIFLASH-CF Industrial (SLC) Grade

SCSIFLASH-CF - The only Compact Flash cards approved for use in the SCSIFlash™ drive to provide optimal performance, endurance & reliability.

The Industrial Grade (SLC) CF card is perfectly suited for all SCSIFlash drive legacy applications. The SCSIFlash CF card is designed to replace the storage media previously used in traditional rotating disk drives including removable media seen in Magneto Optic & Floppy drives. The SCSIFlash Industrial CompactFlash® Memory Cards are embedded solid-state data storage systems for the industrial work place.

Available in 4, 8, 16, 32, 64GB capacities

	SCSIFLASH-CF Datasheet
	Dynamic wear levelling - White paper

Solid State Disks Ltd, design and manufacturer of SCSIFLASH-CF Cards

Features

The CF2SCSI / SCSIFLASH CF uses SLC flash based technology offering;

Single Layer Cell (SLC)
Dynamic wear levelling Highest quality and reliability
High write endurance (BIT error rate 109, Cell write Endurance 100k, Data retention 10+ years)
Low disturb errors (Error detection & bad block management)
High speed

Specifications

Performance
Data transfer mode PIO-4 mode or UDMA-4 mode (Default setting)
Data transfer rate
- 66.6MB/sec under UDMA-4 mode
- 16.6MB/sec under PIO-4 mode
Sequential read 40 MB/sec (Max. /with dual flash)
Sequential write 20 MB/sec (Max. / with dual flash)
Average access time 0.2ms (estimated)

Environmental specification
Operating temperature Standard grade -0 degree ~ +70 degree
Non-operating temperature Standard grade -50 degree ~ +95 degree
Humidity 10% ~ 95% non-condensing
Acoustic noise 0dB
Vibration 15G compliance to MIL-STD-810F
Shock 1,500G compliance to MIL-STD-810F
Altitude 70,000 feet

Power consumption
Power requirement +5V + 10% / +3.3V + 5%
Reading mode 1 Channel 78mA(Max.) / 2 Channel 124mA(Max.) UDMA4 Mode
Writing mode 1 Channel 67mA(Max.) / 2 Channel 121mA(Max.) UDMA4 Mode
Sleeping mode 1 Channel 1.2mA(Max.) / 2 Channel 1.8mA(Max.) UDMA4 Mode

Reliability
Wear-leveling Static wear-leveling algorithms
MTBF > 3,000,000 hours
ECC Enhanced management 4-bits per 512bytes block
Endurance > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad sector management algorithms
Data reliability < 1 non-recoverable error in 1014 bits read
Data retention 10 years

Part Numbers

SCSIFLASH INDUSTRIAL GRADE (SLC) 4GB CF – Part Number – SF4GB-I-CF-T-INO
SCSIFLASH INDUSTRIAL GRADE (SLC) 8GB CF – Part Number – SF8GB-I-CF-T-INO
SCSIFLASH INDUSTRIAL GRADE (SLC) 16GB CF – Part Number – SF16GB-I-CF-T-INO
SCSIFLASH INDUSTRIAL GRADE (SLC) 32GB CF – Part Number – SF32GB-I-CF-T-INO
SCSIFLASH INDUSTRIAL GRADE (SLC) 64GB CF – Part Number – SF64GB-I-CF-T-INO

Product Categories

Market Sectors

Related Product

scsi-flash-(cf)-canon-fpa-3000,-fpa-5000,-hp9000,-hp715-replacement-drive

SCSI Flash (CF) Canon FPA-3000, FPA-5000, HP9000, HP712 replacement drive

SCSIFLASH-CF Industrial (SLC) Grade

Features

Specifications

Part Numbers

Product Categories

Market Sectors

Related Product

Our clients include...

Head Office UK

Head Office Australia

Head Office USA

Disk Emulator

NOTE! This site uses cookies and similar technologies.